NSN G87364

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

unable to decode mounting bolt circle diameter, unable to decode dc resistance rating in ohms, fully inclosed inclosure type, unable to decode mounting facility quantity, unable to decode inductance rating.

NSN 5950-01-067-1019 Datasheet

(NSN) National Stock Number

5950-01-067-1019

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-067-1019

Requires Demilitarization

Yes

(INC) Item Name Code

32494

Date

Wed, Oct 25, 1978

Schedule B Code

8504500000

Dc Resistance Rating In Ohms

unable to decode

Inductance Rating

unable to decode

Inclosure Type

fully inclosed

Mounting Bolt Circle Diameter

unable to decode

Mounting Facility Quantity

unable to decode

Mounting Method

unable to decode

Nominal Thread Size

unable to decode

Overall Diameter

4.530 inches nominal

Overall Length

3.707 inches nominal

Special Features

both winding center tapped

Rating Method

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

6 wire lead

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Winding Operating Voltage

unable to decode

Winding Quantity

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032494

Cross Reference

CAGE Codes

02769

Lockheed Martin Corporation Div Rms

U.s./canadian manufacturers

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

53711

Naval Sea Systems Command

U.s./canadian manufacturers

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

81755

Lockheed Martin Corporation Div Lockheed Martin Aeronautics Company

U.s./canadian manufacturers

99409

Thomas Electronics, Inc. Dba Thomas Electronics of New York Incorporated

U.s./canadian manufacturers

1F702

Gauss Control Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063420

Schedule B & Trade

Schedule B

8504-50-0000

Description

inductors, nesoi

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77125

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5950-01-067-1019?

   The FSCG of the NSN 5950-01-067-1019 is 5950

2. Does the NSN 5950-01-067-1019 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504500000

3. Does NSN 5950-01-067-1019 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-067-1019 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-01-067-1019 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-067-1019 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Wed, Oct 25, 1978