NSN GC842E48

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.307 inches minimum and 0.322 inches maximum loop/holding dimension, 0.205 inches minimum and 0.233 inches maximum distance from loop center to end, 0.323 inches minimum and 0.343 inches maximum length, 0.092 inches minimum and 0.096 inches maximum hole diameter, unable to decode material document and classification.

NSN 5340-00-684-9666 Datasheet

(NSN) National Stock Number

5340-00-684-9666

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-684-9666

Requires Demilitarization

Yes

(INC) Item Name Code

20815

Date

Tue, Jan 1, 1963

Schedule B Code

7326908630

Distance From Loop Center To End

0.205 inches minimum and 0.233 inches maximum

Hole Diameter

0.092 inches minimum and 0.096 inches maximum

Length

0.323 inches minimum and 0.343 inches maximum

Loop/Holding Dimension

0.307 inches minimum and 0.322 inches maximum

Material Document And Classification

unable to decode

Material Thickness

0.011 inches minimum and 0.014 inches maximum

Material

unable to decode

Overall Height

0.367 inches minimum and 0.387 inches maximum

Specification/Standard Data

26512-gc842e48 manufacturers specification

Surface Treatment Document And Classification

unable to decode

Surface Treatment

Width

0.490 inches minimum and 0.510 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020815

Cross Reference

CAGE Codes

99378

Atlee of Delaware, Incorporated

U.s./canadian manufacturers

05030

Raytheon Co Missile Systems Div Lowell Plant

U.s./canadian manufacturers

49956

Raytheon Company Div Corp

U.s./canadian manufacturers

00779

Te Connectivity Corporation

U.s./canadian manufacturers

91506

Augat Inc

U.s./canadian manufacturers

06481

Northrop Grumman Systems Corporation Div the Navigation, Targeting and Survivability Division

U.s./canadian manufacturers

26512

Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Mission Systems

U.s./canadian manufacturers

86928

Seastrom Manufacturing Co Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49780

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094220

Schedule B & Trade

Schedule B

7326-90-8630

Description

hangers and similar supports for tubes and pipes, of iron or steel

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69969

(NAICS) North American Industrial Classification System

332999

Questions & Answers

1. What is the FSCG of the NSN 5340-00-684-9666?

   The FSCG of the NSN 5340-00-684-9666 is 5340

2. Does the NSN 5340-00-684-9666 have a Schedule B code assigned?

   Yes, the Schedule B code is 7326908630

3. Does NSN 5340-00-684-9666 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-00-684-9666 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-00-684-9666 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-684-9666 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963