NSN GEX0055-1

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

white emitted light characteristic, wire leads, down base style, 100.0 average life rating in hours, hours rated average life, tungsten filament color white polytetrafluoroethylene high temp insulation; ansi trade number 2586 special features.

NSN 6240-01-363-6152 Datasheet

(NSN) National Stock Number

6240-01-363-6152

(FSG) Federal Supply Group

62 - Lighting Fixtures and Lamps

(FSC) Federal Supply Classification

6240 - Electric Lamps

(NIIN) National Item Identification Number

01-363-6152

Requires Demilitarization

Yes

(INC) Item Name Code

37331

Date

Tue, Sep 1, 1992

Schedule B Code

9405400000

Average Life Rating In Hours

100.0

Base Style

wire leads, down

Emitted Light Characteristic

white

Rated Average Life

hours

Special Features

tungsten filament color white polytetrafluoroethylene high temp insulation; ansi trade number 2586

Voltage Rating

28.000 volts nominal

Wattage Rating

250.000 watts

Wire Lead Length

6.000 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0037331

Cross Reference

CAGE Codes

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

55438

Goodrich Lighting Systems Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

H - 110.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

56020

Water Commodity

761 - Electric lamps

National Motor Freight Classification Item Number

109800

Questions & Answers

1. What is the FSCG of the NSN 6240-01-363-6152?

   The FSCG of the NSN 6240-01-363-6152 is 6240

2. Does the NSN 6240-01-363-6152 have a Schedule B code assigned?

   Yes, the Schedule B code is 9405400000

3. Does NSN 6240-01-363-6152 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6240-01-363-6152 contain precious materials?

   Precious metal content is unknown

5. Does NSN 6240-01-363-6152 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6240-01-363-6152 was assigned to the Federal Catalog?

   It was assigned 34 years ago, on Tue, Sep 1, 1992