NSN GI-50

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

50.000 amperes current rating, 4.750 inches nominal overall height, galvanic isolator part name assigned by controlling agency, boat, area search 40ft 40as0401 end item identification, aluminum material.

NSN 5920-01-538-1318 Datasheet

(NSN) National Stock Number

5920-01-538-1318

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5920 - Fuses, Arrestors, Absorbers and Protectors

(NIIN) National Item Identification Number

01-538-1318

Requires Demilitarization

Yes

(INC) Item Name Code

50029

Date

Mon, Mar 13, 2006

End Item Identification

boat, area search 40ft 40as0401

Current Rating

50.000 amperes

Material

aluminum

Part Name Assigned By Controlling Agency

galvanic isolator

Overall Height

4.750 inches nominal

Overall Length

8.900 inches nominal

Overall Width

4.500 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0050029

Cross Reference

CAGE Codes

58424

Newmar Corporation

U.s./canadian manufacturers

62028

Roi Development Corp. Dba Newmar

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061700

Questions & Answers

1. What is the FSCG of the NSN 5920-01-538-1318?

   The FSCG of the NSN 5920-01-538-1318 is 5920

2. Does NSN 5920-01-538-1318 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5920-01-538-1318 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5920-01-538-1318 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5920-01-538-1318 was assigned to the Federal Catalog?

   It was assigned 20 years ago, on Mon, Mar 13, 2006