NSN HV-485

A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes:bearing, plain, spherical and bearing, plain, self-aligning.

3.780 inches maximum body length, w/thd mtg hole(s)/stud(s) terminal(s) on one surface body style, 0.004 microfarads single section capacitance value per section, 0.900 inches maximum body width, 3.280 inches maximum body height.

NSN 5910-01-294-9407 Datasheet

(NSN) National Stock Number

5910-01-294-9407

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-294-9407

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Fri, Feb 24, 1989

Schedule B Code

8532290020

Body Height

3.280 inches maximum

Body Length

3.780 inches maximum

Body Style

w/thd mtg hole(s)/stud(s) terminal(s) on one surface

Body Width

0.900 inches maximum

Capacitance Value Per Section

0.004 microfarads single section

Center To Center Distance Between Terminals Parallel To Length

2.000 inches nominal

Dissipation Factor At Reference Temp In Percent

0.500

Insulation Resistance At Reference Temp

45000.0 megohms

Material

plastic case

Mounting Facility Type And Quantity

4 unthreaded mounting holes

Nonderated Operating Temp

0.0 celsius minimum and 70.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

25000.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius

-3.0 to 5.0 single section

Terminal Diameter

0.025 inches nominal

Terminal Length

12.000 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Unthreaded Mounting Hole Diameter

0.169 inches minimum and 0.174 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

23280

Custom Electronics, Inc. Dba Custom Electronics Inc

U.s./canadian manufacturers

21966

Tdl, Inc Dba T D L

U.s./canadian manufacturers

13058

Sora Power Inc. Dba Sora Power Inc

U.s./canadian manufacturers

00779

Te Connectivity Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-294-9407?

   The FSCG of the NSN 5910-01-294-9407 is 5910

2. Does the NSN 5910-01-294-9407 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-01-294-9407 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-294-9407 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-294-9407 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-294-9407 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Fri, Feb 24, 1989