NSN J1283-1

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

2 cable opening quantity, 2 threaded hole(s) mounting facility type and quantity, aluminum alloy material, 3.312 inches nominal center to center distance between mounting facilities parallel to length, 3.312 inches nominal center to center distance between mounting facilities parallel to width.

NSN 5935-01-227-9983 Datasheet

(NSN) National Stock Number

5935-01-227-9983

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-227-9983

Requires Demilitarization

Yes

(INC) Item Name Code

67169

Date

Thu, Mar 13, 1986

Schedule B Code

8548900100

Cable Opening Quantity

2

Center To Center Distance Between Mounting Facilities Parallel To Width

3.312 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Length

3.312 inches nominal

Material

aluminum alloy

Mounting Facility Type And Quantity

2 threaded hole(s)

Nominal Thread Size

0.138 inches and 0.164 inches

Overall Height

4.880 inches maximum

Overall Length

3.844 inches maximum

Overall Width

3.844 inches maximum

Seal Type

preformed packing

Special Features

item supplied with 2 isolated individual shield terminator with drain wire and shrink sleeve

Style Designator

straight type w/flange

Surface Treatment

cadmium

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Seal Material

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0067169

Cross Reference

CAGE Codes

05869

Raytheon Company Div Rmd Strategic

U.s./canadian manufacturers

07418

Joslyn Sunbank Company, Llc Dba Joslyn Sunbank Co Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-01-227-9983?

   The FSCG of the NSN 5935-01-227-9983 is 5935

2. Does the NSN 5935-01-227-9983 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-227-9983 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-227-9983 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-227-9983 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-227-9983 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Thu, Mar 13, 1986