NSN JA2-A3-A-10-2

A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see valve (1), linear, directional control. It may be inline or cartridge (manifold) design. Excludes:valve (1), butterfly.

magnetic blowout arc quenching method, trip-reset actuator function, 1.985 inches minimum and 2.015 inches maximum body length, at each pole actuator position designation, f-16, s-3b viking, a-6e intruder aircraft. submarine acoustic sonar systems. sonar acoustic miscellaneous. h-2 seasprite, uh-1n utility/search and recovery helicopters. end item identification.

NSN 5925-00-627-2011 Datasheet

(NSN) National Stock Number

5925-00-627-2011

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

00-627-2011

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Fri, Jul 9, 1971

Schedule B Code

8536200040

End Item Identification

f-16, s-3b viking, a-6e intruder aircraft. submarine acoustic sonar systems. sonar acoustic miscellaneous. h-2 seasprite, uh-1n utility/search and recovery helicopters.

Actuator Function

trip-reset

Actuator Position Designation

at each pole

Arc Quenching Method

magnetic blowout

Body Length

1.985 inches minimum and 2.015 inches maximum

Body Style

multipole-multiple actuator type

Body Width

1.468 inches minimum and 1.532 inches maximum

Boss Height

0.125 inches minimum and 0.135 inches maximum

Center To Center Distance Between Terminals Parallel To Length

1.555 inches minimum and 1.565 inches maximum

Center To Center Distance Between Terminals Parallel To Width

0.745 inches minimum and 0.755 inches maximum

Circuit Protection Type

overcurrent all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.745 inches minimum and 0.755 inches maximum

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.655 inches minimum and 1.665 inches maximum

External Actuator Linkage Arrangement

one and two linked

Fragility Factor

moderately rugged

Frequency In Hertz

50.0 or 60.0 all locations

Inclosure Protection Type For Which Designed

humidity resistant and shock resistant and vibration resistant

Internal Trip Release Configuration

series trip all locations

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

2 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

10.0 amperes ac all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

1000.0 ac all locations

Mounting Facility Type And Quantity

4 threaded hole(s)

Mounting Surface To Terminal End Distance

1.898 inches minimum and 1.962 inches maximum

Nominal Thread Size

0.138 inches

Operating Voltage Type And Rating Per Pole In Volts

250.0 ac all locations

Pole Quantity

2

Reset Method

manual

Storage Type

general purpose warehouse

Terminal Type And Quantity

4 quick disconnect, male

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Trip Release Characteristic

time delay all locations

Trip Release Method

magnetic-hydraulic all locations

Trip Delay Time In Seconds Per Rated Continuous Current

2.500 minimum at 200 pct and 20.000 maximum at 200 pct all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 all locations

Unpackaged Unit Weight

5.000 ounces nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

1LQK8

Keysight Technologies, Inc.

U.s./canadian manufacturers

28480

Hewlett-Packard Company Dba Hp

U.s./canadian manufacturers

7ZXR5

Keysight Technologies Inc

U.s./canadian manufacturers

14859

Texas Instruments Inc Control Products Div

U.s./canadian manufacturers

74193

Eaton Corp Heinemann Products Commercial Controls Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-00-627-2011?

   The FSCG of the NSN 5925-00-627-2011 is 5925

2. Does the NSN 5925-00-627-2011 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-00-627-2011 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-00-627-2011 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-00-627-2011 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-00-627-2011 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Fri, Jul 9, 1971