NSN JK47

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

bushing mounted long frame body style, round bushing accommodation hole shape, two conductor, round tip single finger accommodated finger type, 0.562 inches nominal body width, 0.448 inches nominal bushing thru-hole accommodation diameter.

NSN 5935-00-241-0769 Datasheet

(NSN) National Stock Number

5935-00-241-0769

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-241-0769

Requires Demilitarization

Yes

(INC) Item Name Code

00124

Date

Tue, Jan 1, 1963

Schedule B Code

8517700000

Accommodated Finger Type

two conductor, round tip single finger

Body Style

bushing mounted long frame

Body Width

0.562 inches nominal

Bushing Accommodation Hole Shape

round

Bushing Thru-Hole Accommodation Diameter

0.448 inches nominal

Electrical Insulation Feature

uninsulated

Finger Accommodation Diameter

0.276 inches nominal single finger

Finger Accommodation Length

0.979 inches nominal single finger

Jack Contact Arrangement Designator

j4

Mounting Bushing Length

0.546 inches nominal

Mounting Bushing Diameter

0.448 inches nominal

Mounting Hole Diameter

0.156 inches nominal

Overall Height

0.859 inches nominal

Overall Length

3.437 inches nominal

Surface Treatment

tin terminal

Terminal Type

tab, solder lug

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000124

Cross Reference

CAGE Codes

04773

Gte Communication Systems Corp

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-00-241-0769?

   The FSCG of the NSN 5935-00-241-0769 is 5935

2. Does the NSN 5935-00-241-0769 have a Schedule B code assigned?

   Yes, the Schedule B code is 8517700000

3. Does NSN 5935-00-241-0769 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-241-0769 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-241-0769 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-241-0769 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963