NSN JPS1034HR

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

internally threaded coupling ring connector locking method, straight shape, internal coupling w/strain relief body style, 10.250 inches nominal body length, 1.875 inches maximum cable entrance diameter, cable clamp connector cable strain relief method.

NSN 5935-01-210-6370 Datasheet

(NSN) National Stock Number

5935-01-210-6370

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-210-6370

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Fri, Jun 14, 1985

Schedule B Code

8536695050

Body Length

10.250 inches nominal

Body Style

straight shape, internal coupling w/strain relief

Cable Entrance Diameter

1.875 inches maximum

Connector Cable Strain Relief Method

cable clamp

Connector Locking Method

internally threaded coupling ring

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

nonremovable single mating end single contact grouping

Contact Maximum Current Rating In Amps

100.0 single mating end single contact grouping

Contact Surface Treatment

silver single mating end single contact grouping

Included Contact Quantity

3 single mating end single contact grouping

Included Contact Type

round socket single mating end single contact grouping

Insert Material

rubber silicone class q single mating end

Mating End Quantity

1

Overall Diameter

4.125 inches nominal

Polarization Method

mating end

Precious Material And Location

contact surfaces silver

Precious Material

silver

Precious Material And Weight

0.015 silver grains, troy

Shell Material

aluminum

Shell Type

solid

Terminal Location

back single mating end single contact grouping

Terminal Type

solder well single mating end single contact grouping

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

56501

Abb Installation Products Inc

U.s./canadian manufacturers

78011

Midland-Ross Corp Russellstoll Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-210-6370?

   The FSCG of the NSN 5935-01-210-6370 is 5935

2. Does the NSN 5935-01-210-6370 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-210-6370 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-210-6370 contain precious materials?

   Item contains silver.

5. Does NSN 5935-01-210-6370 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-210-6370 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Fri, Jun 14, 1985