NSN K11B103JSA1353

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

plastic case insulation material, 0.657 inches minimum and 0.717 inches maximum body length, 0.010 microfarads single section capacitance value per section, 0.235 inches minimum and 0.255 inches maximum body diameter, w/o mtg facilities, axial terminals body style.

NSN 5910-01-422-9760 Datasheet

(NSN) National Stock Number

5910-01-422-9760

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-422-9760

Requires Demilitarization

Yes

(INC) Item Name Code

31959

Date

Wed, Dec 13, 1995

Schedule B Code

8532290040

Body Diameter

0.235 inches minimum and 0.255 inches maximum

Body Length

0.657 inches minimum and 0.717 inches maximum

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

0.010 microfarads single section

Case Insulation Material

plastic

Dissipation Factor At Reference Temp In Percent

0.100

Dielectric Material

plastic polytetrafluoroethylene

Features Provided

hermetically sealed case

Nonderated Operating Temp

-65.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

electrode(s) grounded to case, w/gnd terminal

Terminal Diameter

0.032 inches nominal

Terminal Length

1.625 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0031959

Cross Reference

CAGE Codes

26055

Parker-Hannifin Corporation Dba Pneutronics Div Fluid Systems Division

U.s./canadian manufacturers

59211

Parker-Hannifin Corporation Div Services and Support Operations

U.s./canadian manufacturers

12517

Component Research Co Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-422-9760?

   The FSCG of the NSN 5910-01-422-9760 is 5910

2. Does the NSN 5910-01-422-9760 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-422-9760 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-422-9760 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-422-9760 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-422-9760 was assigned to the Federal Catalog?

   It was assigned 30 years ago, on Wed, Dec 13, 1995