NSN KC79-91

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

bayonet pin connector locking method, 0.500 inches nominal center to center distance between mounting facilities parallel to height, unable to decode contact material document and classification, straight shape, external coupling body style, unable to decode contact material.

NSN 5935-01-068-2535 Datasheet

(NSN) National Stock Number

5935-01-068-2535

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-068-2535

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Sat, Nov 18, 1978

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

0.500 inches nominal

Connector Locking Method

bayonet pin

Contact Material Document And Classification

unable to decode

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Surface Treatment Document And Classification

unable to decode

Contact Surface Treatment

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.500 inches nominal

Distance From Mounting Shoulder To Front Face

0.630 inches nominal

Environmental Protection

shock proof and vibration proof

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material

unable to decode

Mating End Quantity

1

Overall Height

0.690 inches nominal

Overall Length

1.030 inches nominal

Overall Width

0.690 inches nominal

Precious Material And Location

contact and body surfaces silver

Precious Material And Weight

0.105 silver grains, troy

Precious Material

silver

Radio Frequency Type Contact Characteristic Impedance In Ohms

unable to decode

Shell Material Document And Classification

qq-b-626,alloy 360,1/2 hard fed spec single material response

Shell Material

copper alloy

Shell Surface Treatment Document And Classification

qq-s-365a fed spec single treatment response

Shell Surface Treatment

silver

Shell Type

solid

Terminal Location

unable to decode

Terminal Type

unable to decode

Unthreaded Mounting Hole Diameter

0.125 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

24931

Specialty Connector Co Inc

U.s./canadian manufacturers

26055

Parker-Hannifin Corporation Dba Pneutronics Div Fluid Systems Division

U.s./canadian manufacturers

91836

Winchester Interconnect Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-068-2535?

   The FSCG of the NSN 5935-01-068-2535 is 5935

2. Does the NSN 5935-01-068-2535 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-068-2535 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-068-2535 contain precious materials?

   Item contains silver.

5. Does NSN 5935-01-068-2535 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-068-2535 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Sat, Nov 18, 1978