NSN KL1344

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

plastic; white; notches on side w/retainer for adjustment and mtg general characteristics item description.

NSN 5975-00-626-9982 Datasheet

(NSN) National Stock Number

5975-00-626-9982

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

00-626-9982

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Tue, Jan 1, 1963

General Characteristics Item Description

plastic; white; notches on side w/retainer for adjustment and mtg

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1122066

Cross Reference

CAGE Codes

04673

Dakota Engineering Inc

U.s./canadian manufacturers

01526

Genicom Corp

U.s./canadian manufacturers

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

24446

General Electric Company

U.s./canadian manufacturers

92755

Northrop Grumman Systems Corp Dba Northrop Grumman Systems Corp Div Land & Self Protection Systems Div

U.s./canadian manufacturers

38597

Lockheed Martin Corporation Div Rotary and Mission Systems

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

S - 60.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34370

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061200

Questions & Answers

1. What is the FSCG of the NSN 5975-00-626-9982?

   The FSCG of the NSN 5975-00-626-9982 is 5975

2. Does NSN 5975-00-626-9982 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5975-00-626-9982 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5975-00-626-9982 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5975-00-626-9982 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963