NSN L03295

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5999-01-156-8917, electronic shielding gasket.

NSN 5999-01-156-8917 Datasheet

(NSN) National Stock Number

5999-01-156-8917

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5999 - Miscellaneous Electrical and Electronic Components

(NIIN) National Item Identification Number

01-156-8917

Requires Demilitarization

Yes

(INC) Item Name Code

20281

Date

Mon, Jun 27, 1983

Schedule B Code

8543909000

Identification

Demilitarization Code

F - Usml or ccl military items - demil required. Item managers,, equipment specialists, or product specialists must furnish special demilinstructions. (note 3).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020281

Cross Reference

CAGE Codes

07700

Technical Wire Products, Llc Dba Twp

U.s./canadian manufacturers

94271

Lockheed Martin Corp

U.s./canadian manufacturers

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5999-01-156-8917?

   The FSCG of the NSN 5999-01-156-8917 is 5999

2. Does the NSN 5999-01-156-8917 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5999-01-156-8917 require demilitarization?

   Usml or ccl military items - demil required. Item managers,, equipment specialists, or product specialists must furnish special demilinstructions. (note 3).

4. Does NSN 5999-01-156-8917 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5999-01-156-8917 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5999-01-156-8917 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Mon, Jun 27, 1983