NSN L520003853

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

hood, top opening w/clamp body style, jackscrew-socket connector locking method, 0.440 inches minimum and 0.750 inches maximum cable entrance diameter, unable to decode contact position arrangement style, cable clamp connector cable strain relief method.

NSN 5935-00-814-4140 Datasheet

(NSN) National Stock Number

5935-00-814-4140

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-814-4140

Requires Demilitarization

Yes

(INC) Item Name Code

61924

Date

Tue, Jan 1, 1963

Schedule B Code

8538907080

Body Style

hood, top opening w/clamp

Cable Entrance Diameter

0.440 inches minimum and 0.750 inches maximum

Connector Cable Strain Relief Method

cable clamp

Connector Locking Method

jackscrew-socket

Contact Position Arrangement Style

unable to decode

Environmental Protection

moisture resistant and salt water resistant

Insert Material

unable to decode

Mating End Quantity

1

Nominal Thread Size

0.138 inches

Overall Height

2.560 inches maximum

Overall Length

2.840 inches nominal

Overall Width

1.000 inches nominal

Polarization Method

guide pin/socket and jackscrew

Shell Material

aluminum alloy

Shell Surface Treatment

anodize

Shell Type

hood, top opening

Thread Class

2a and 2b

Thread Direction

right-hand

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061924

Cross Reference

CAGE Codes

53711

Naval Sea Systems Command

U.s./canadian manufacturers

81312

Winchester Interconnect Corporation Dba Winchester Interconnect Div Winchester Interconnect

U.s./canadian manufacturers

36090

Lockheed Martin Librascope Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-00-814-4140?

   The FSCG of the NSN 5935-00-814-4140 is 5935

2. Does the NSN 5935-00-814-4140 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-00-814-4140 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-814-4140 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-814-4140 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-814-4140 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963