NATO Stock Number
5990-00-444-6987
Sold in multiples of
1 EA
DEMIL
NO
Body Material
Steel, corrosion resisting
Body Style
Standard round c
Shoulder Diameter
Between 0.0995 inches and 1.0000 inches
Pilot Diameter
Between 0.6245 inches and 0.6250 inches
Overall Length
2.2240 inches
Flange Diameter
Between 1.0615 inches and 1.0620 inches
Flange Thickness
0.0930 inches
Undercut Diameter
0.9750 inches
Undercut Width
0.0620 inches
Shaft Diameter
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length
0.3680 inches single shaft
Maximum Tempurature Rise
10.0 degrees celsius
Body Size
11
Stator Input Voltage Rating In Volts
90.0
Stator Input Current Rating
18.0 milliamperes
Stator Input Electrical Power Rating
20.0 watts
Frequency In Hertz
400.0
Zso Impedance Magnitude In Ohms
Between 4350.00 and 5700.00
Zso Impedance Angle In Deg
Between 77.30 and 83.50
Zrs Impedance Magnitude In Ohms
Between 585.00 and 700.00
Zrs Impedance Angle In Deg
Between 22.00 and 32.00
Phase Shift Angle In Deg
5.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt
32.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt
60.00
Electrical Error Angular Range In Minutes
-7.0/+7.0
Alignment Hole Quantity
4
Pilot Length
0.0620 inches
Shoulder Length
0.0620 inches
Mounting Surface To Terminal End Distance
1.8010 inches
Terminal Location
Rear
Shaft Slot Depth
0.0250 inches single shaft
Shaft Slot Width
0.0200 inches single shaft
Shaft Type
Round, slotted single shaft
Alignment Hole Depth
0.1120 inches
Transformation Ratio
0.735 rotor to stator
Alignment Hole Bolt Circle Diameter
0.8120 inches
Test Data Document
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity
5 wire lead