NATO Stock Number
5990-00-603-9313
Sold in multiples of
EA
DEMIL
NO
Body Material
Any acceptable
Body Style
Standard round c
Shoulder Diameter
Between 0.9995 inches and 1.0000 inches
Pilot Diameter
Between 0.6245 inches and 0.6250 inches
Overall Length
2.2460 inches
Flange Diameter
Between 1.0570 inches and 1.0620 inches
Flange Thickness
0.0930 inches
Undercut Diameter
0.9700 inches
Undercut Width
0.0620 inches
Shaft Diameter
0.1198 inches single shaft and 0.1200 inches single shaft
Shaft Length
0.3680 inches single shaft
Maximum Tempurature Rise
20.0 degrees celsius
Body Size
11
Rotor Input Voltage Rating In Volts
90.0
Frequency In Hertz
400.0
Rotor Input Current Rating
49.0 milliamperes
Rotor Input Electrical Power Rating
530.0 milliwatts
Zso Impedance Magnitude In Ohms
Between 1590.00 and 2050.00
Zso Impedance Angle In Deg
Between 79.00 and 85.00
Zrs Impedance Magnitude In Ohms
Between 470.00 and 570.00
Zrs Impedance Angle In Deg
Between 23.00 and 33.00
Phase Shift Angle In Deg
4.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt
60.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt
90.00
Electrical Error Angular Range In Minutes
-7.0/+7.0
Actuator Friction Torque At Plus 25 Deg Celsius
0.07 inch-ounces
Alignment Hole Quantity
4
Pilot Length
0.0620 inches
Shoulder Length
0.0620 inches
Mounting Surface To Terminal End Distance
1.8510 inches
Terminal Location
Rear
Shaft Slot Depth
0.0250 inches single shaft
Shaft Slot Width
0.0200 inches single shaft
Shaft Type
Round, slotted single shaft
Alignment Hole Depth
0.2500 inches
Transformation Ratio
1.154 rotor to stator
Alignment Hole Bolt Circle Diameter
Between 0.8090 inches and 0.8150 inches
Test Data Document
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity
6 wire lead
