NSN M28748/4-E0RF2A

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

removable single mating end single contact grouping contact removability, round socket single mating end single contact grouping included contact type, copper alloy single mating end single contact grouping contact material, 26 single mating end single contact grouping included contact quantity, gold single mating end single contact grouping contact surface treatment.

NSN 5935-01-438-4658 Datasheet

(NSN) National Stock Number

5935-01-438-4658

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-438-4658

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Thu, Nov 7, 1996

Schedule B Code

8536695050

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

removable single mating end single contact grouping

Contact Surface Treatment

gold single mating end single contact grouping

Included Contact Quantity

26 single mating end single contact grouping

Included Contact Type

round socket single mating end single contact grouping

Overall Height

0.865 inches nominal

Overall Length

1.755 inches maximum

Overall Width

0.688 inches maximum

Precious Material

gold

Shell Material

aluminum alloy

Shell Surface Treatment

anodize

Shell Type

solid

Specification/Standard Data

81349-mil-c-28748/4 government specification

Terminal Type

crimp single mating end single contact grouping

Test Data Document

"81349-mil-c-28748 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-438-4658?

   The FSCG of the NSN 5935-01-438-4658 is 5935

2. Does the NSN 5935-01-438-4658 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-438-4658 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-438-4658 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-438-4658 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-438-4658 was assigned to the Federal Catalog?

   It was assigned 29 years ago, on Thu, Nov 7, 1996