NSN M5730

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

1.156 inches nominal body length, 0.906 inches nominal body width, 0.906 inches nominal body height, frequency rating, unable to decode impedance rating in ohms.

NSN 5950-00-936-9014 Datasheet

(NSN) National Stock Number

5950-00-936-9014

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-936-9014

Requires Demilitarization

Yes

(INC) Item Name Code

00780

Date

Fri, Mar 17, 1967

Schedule B Code

8548900100

Body Height

0.906 inches nominal

Body Length

1.156 inches nominal

Body Width

0.906 inches nominal

Frequency Rating

Impedance Rating In Ohms

unable to decode

Inclosure Type

hermetically sealed

Maximum Transformer Power Rating

unable to decode

Mounting Method

unable to decode

Mounting Tab Width

0.020 inches nominal

Reliability Indicator

not established

Terminal Type And Quantity

6 pin

Winding Function And Quantity

Winding Operating Current

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000780

Cross Reference

CAGE Codes

03956

Northrop Grumman Systems Corporation

U.s./canadian manufacturers

00348

Microtran Co Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-936-9014?

   The FSCG of the NSN 5950-00-936-9014 is 5950

2. Does the NSN 5950-00-936-9014 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-00-936-9014 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-936-9014 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-936-9014 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-936-9014 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Fri, Mar 17, 1967