NSN M7SLRM

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

round bushing accommodation hole shape, unable to decode contact position arrangement style, straight shape threaded body style, unable to decode contact material, snap ring connector locking method.

NSN 5935-00-960-3174 Datasheet

(NSN) National Stock Number

5935-00-960-3174

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-960-3174

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Wed, May 25, 1966

Schedule B Code

8538907080

Body Style

straight shape threaded

Bushing Accommodation Hole Shape

round

Connector Locking Method

snap ring

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Current Rating In Amps

unable to decode

Contact Surface Treatment

unable to decode

Distance From Mounting Shoulder To Front Face

0.340 inches nominal

Environmental Protection

vibration resistant

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material

unable to decode

Mating End Quantity

1

Mounting Facility Thickness

0.030 inches nominal

Nominal Thread Size

0.500 inches

Overall Diameter

0.560 inches nominal

Overall Length

0.530 inches nominal

Polarization Method

guide pin/socket

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.007 gold grains, troy

Terminal Location

unable to decode

Terminal Type

unable to decode

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

20

Thread Series Designator

unf

Threaded Device Type

mounting bushing

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

94756

The Boeing Company Div Legacy Boeing Hb1

U.s./canadian manufacturers

02660

Amphenol Corp Spectra-Strip/itd

U.s./canadian manufacturers

13511

Amphenol Cadre Div Bunker Ramo Corp

U.s./canadian manufacturers

53711

Naval Sea Systems Command

U.s./canadian manufacturers

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

95238

Winchester Interconnect Corporation Dba Winchester Interconnect Div Winchester Interconnect Rf Corporation

U.s./canadian manufacturers

01714

Lucent Technologies Inc Advanced Technology Systems

Non-manufacturers

81312

Winchester Interconnect Corporation Dba Winchester Interconnect Div Winchester Interconnect

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-00-960-3174?

   The FSCG of the NSN 5935-00-960-3174 is 5935

2. Does the NSN 5935-00-960-3174 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-00-960-3174 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-960-3174 contain precious materials?

   Item contains gold.

5. Does NSN 5935-00-960-3174 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-960-3174 was assigned to the Federal Catalog?

   It was assigned 60 years ago, on Wed, May 25, 1966