NSN M8340101K1372FA

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

125.0 ambient temp in deg celsius at zero percent rated power, 0.200 inches maximum body width, 70.0 ambient temp in deg celsius at full rated power, 0.240 inches minimum and 0.305 inches maximum body height, 0.760 inches minimum and 0.876 inches maximum body length.

NSN 5905-01-461-7600 Datasheet

(NSN) National Stock Number

5905-01-461-7600

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

01-461-7600

Requires Demilitarization

Yes

(INC) Item Name Code

32068

Date

Thu, Dec 31, 1998

Schedule B Code

8533100057

Ambient Temp In Deg Celsius At Full Rated Power

70.0

Ambient Temp In Deg Celsius At Zero Percent Rated Power

125.0

Body Height

0.240 inches minimum and 0.305 inches maximum

Body Length

0.760 inches minimum and 0.876 inches maximum

Body Width

0.200 inches maximum

Electrical Resistance

13.700 kilohms

Identical Value Resistor Quantity

unable to decode

Inclosure Method

encapsulated

Power Dissipation Rating In Watts

0.100 each resistor

Reliability Indicator

not established

Resistance Tolerance In Percent

-1.000 to 1.000

Schematic Diagram Designator

isolated array

Specification/Standard Data

81349-mil-prf-83401/2 government specification

Style Designator

dual inline

Temp Coefficient Of Resistance In Ppm Per Deg Celsius

-100.0 to 100.0

Temp Range Of Temp Coefficient In Deg Celsius

-55.0 to 125.0

Terminal Length

0.125 inches minimum and 0.150 inches maximum

Terminal Quantity

16

Terminal Type

pin

Test Data Document

"81349-mil-prf-83401 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0032068

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

35140

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-10-0057

Description

fixed carbon resistors, composition or film type, having more than two leads (resistor network)

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77231

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-01-461-7600?

   The FSCG of the NSN 5905-01-461-7600 is 5905

2. Does the NSN 5905-01-461-7600 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533100057

3. Does NSN 5905-01-461-7600 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-01-461-7600 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5905-01-461-7600 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-01-461-7600 was assigned to the Federal Catalog?

   It was assigned 27 years ago, on Thu, Dec 31, 1998