NSN M8340102C1000FA

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

70.0 ambient temp in deg celsius at full rated power, 0.830 inches nominal body length, 125.0 ambient temp in deg celsius at zero percent rated power, 0.135 inches maximum body height, 0.270 inches nominal body width.

NSN 5905-01-259-9501 Datasheet

(NSN) National Stock Number

5905-01-259-9501

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

01-259-9501

Requires Demilitarization

Yes

(INC) Item Name Code

32068

Date

Thu, Jul 23, 1987

Schedule B Code

8533100057

Ambient Temp In Deg Celsius At Full Rated Power

70.0

Ambient Temp In Deg Celsius At Zero Percent Rated Power

125.0

Body Height

0.135 inches maximum

Body Length

0.830 inches nominal

Body Width

0.270 inches nominal

Cubic Measure

0.040 cubic inches

Electrical Resistance

unable to decode

Identical Value Resistor Quantity

unable to decode

Inclosure Method

hermetically sealed

Power Dissipation Rating In Watts

0.800 total network

Reliability Indicator

not established

Resistance Tolerance In Percent

unable to decode

Schematic Diagram Designator

isolated array

Specification/Standard Data

81349-mil-r-83401/2 government specification

Style Designator

dual inline

Temp Coefficient Of Resistance In Ppm Per Deg Celsius

-50.0 to 50.0

Temp Range Of Temp Coefficient In Deg Celsius

-55.0 to 125.0

Terminal Length

0.145 inches minimum and 0.215 inches maximum

Terminal Quantity

16

Terminal Type

pin

Terminal Width

0.015 inches minimum and 0.022 inches maximum

Test Data Document

"81349-mil-r-83401 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unpackaged Unit Weight

1.5 grams

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0032068

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

35140

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-10-0057

Description

fixed carbon resistors, composition or film type, having more than two leads (resistor network)

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77231

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-01-259-9501?

   The FSCG of the NSN 5905-01-259-9501 is 5905

2. Does the NSN 5905-01-259-9501 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533100057

3. Does NSN 5905-01-259-9501 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-01-259-9501 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5905-01-259-9501 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-01-259-9501 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Thu, Jul 23, 1987