NSN M85528/1-16-A

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of a mixture of carbon, an insulating material, and suitable binders, either molded together or applied as a thin layer of conducting material on an insulated form. The opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the item itself. See also attenuator,fixed; resistor,fixed,film; and resistor,thermal. Excludes:suppressor,ignition interference.

0.966 inches minimum and 0.972 inches maximum center to center distance between mounting facilities parallel to length, feat criticality code justification, 4 clinch nut mounting facility type and quantity, 0.966 inches minimum and 0.972 inches maximum center to center distance between mounting facilities parallel to width, aluminum alloy material.

NSN 5935-01-323-1237 Datasheet

(NSN) National Stock Number

5935-01-323-1237

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-323-1237

Requires Demilitarization

Yes

(INC) Item Name Code

21538

Date

Sat, Jul 21, 1990

Schedule B Code

8548900100

Center To Center Distance Between Mounting Facilities Parallel To Length

0.966 inches minimum and 0.972 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Width

0.966 inches minimum and 0.972 inches maximum

Criticality Code Justification

feat

Material

aluminum alloy

Mounting Facility Type And Quantity

4 clinch nut

Nominal Thread Size

0.112 inches

Overall Height

0.106 inches minimum and 0.166 inches maximum

Overall Length

1.240 inches minimum and 1.270 inches maximum

Overall Width

1.240 inches minimum and 1.270 inches maximum

Size Designation

16

Special Features

primer coat is required

Specification/Standard Data

81349-mil-c-85528/1 government specification

Style Designator

square shape

Surface Treatment

chromate

Test Data Document

"81349-mil-c-85528 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

40

Thread Series Designator

unified national coarse (unc)

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0021538

Cross Reference

CAGE Codes

04967

Fastener Specialty, Inc.

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-01-323-1237?

   The FSCG of the NSN 5935-01-323-1237 is 5935

2. Does the NSN 5935-01-323-1237 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-323-1237 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-323-1237 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-323-1237 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-323-1237 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Sat, Jul 21, 1990