NSN MCBH3F

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

waterproof environmental protection, connector body chloroprene rubber; voltage rating 300v ac rms; dc rating85 percent above ac rating; insulation resistance greater than 200 mohn; contact resistance less than .01 ohm; west mating greater than 500; temperature rating in water 25 to 140 degree fahrenheit; temperature rating air/storage m inus 40 to 1400 fahrenheit special features, subcon micro circular 3 contacts part name assigned by controlling agency.

NSN 5935-01-663-3363 Datasheet

(NSN) National Stock Number

5935-01-663-3363

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-663-3363

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Fri, May 5, 2017

Schedule B Code

8538907080

Environmental Protection

waterproof

Part Name Assigned By Controlling Agency

subcon micro circular 3 contacts

Special Features

connector body chloroprene rubber; voltage rating 300v ac rms; dc rating85 percent above ac rating; insulation resistance greater than 200 mohn; contact resistance less than .01 ohm; west mating greater than 500; temperature rating in water 25 to 140 degree fahrenheit; temperature rating air/storage m inus 40 to 1400 fahrenheit

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

1PNG7

Macartney Inc

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-663-3363?

   The FSCG of the NSN 5935-01-663-3363 is 5935

2. Does the NSN 5935-01-663-3363 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-663-3363 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-663-3363 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-663-3363 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-663-3363 was assigned to the Federal Catalog?

   It was assigned 9 years ago, on Fri, May 5, 2017