NSN MODEL 0S100M

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

corrosion proof polyurethane,monel and delrin; with sensor unit,control unit w/recorder,remote status indicator,accessories kit,inter-connect cable and technical manual; digital display,0-30 ppm and 0-150 ppm of concentration of oil; alarm; 115 volts ac,60 hertz,80 amps general characteristics item description.

NSN 6630-01-243-0496 Datasheet

(NSN) National Stock Number

6630-01-243-0496

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6630 - Chemical Analysis Instruments

(NIIN) National Item Identification Number

01-243-0496

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Tue, Oct 21, 1986

Schedule B Code

9027803200

General Characteristics Item Description

corrosion proof polyurethane,monel and delrin; with sensor unit,control unit w/recorder,remote status indicator,accessories kit,inter-connect cable and technical manual; digital display,0-30 ppm and 0-150 ppm of concentration of oil; alarm; 115 volts ac,60 hertz,80 amps

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

1367810

Cross Reference

CAGE Codes

52664

Spherix Incorporated

Non-manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 6630-01-243-0496?

   The FSCG of the NSN 6630-01-243-0496 is 6630

2. Does the NSN 6630-01-243-0496 have a Schedule B code assigned?

   Yes, the Schedule B code is 9027803200

3. Does NSN 6630-01-243-0496 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6630-01-243-0496 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6630-01-243-0496 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 6630-01-243-0496 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Tue, Oct 21, 1986