NSN MP705B

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

1.094 inches maximum body length, 0.750 inches maximum body width, at pole one actuator position designation, trip-reset actuator function, single pole type body style.

NSN 5925-00-581-3926 Datasheet

(NSN) National Stock Number

5925-00-581-3926

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

00-581-3926

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Tue, Jan 1, 1963

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole one

Body Length

1.094 inches maximum

Body Style

single pole type

Body Width

0.750 inches maximum

Bushing Length

0.202 inches minimum and 0.298 inches maximum

Center To Center Distance Between Terminals Parallel To Length

0.704 inches nominal

Circuit Protection Type

overcurrent single location

Fragility Factor

moderately rugged

Frequency In Hertz

400.0 single location

Inclosure Protection Type For Which Designed

shock resistant and vibration resistant

Internal Trip Release Configuration

series trip single location

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 push-pull

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

30.0 amperes ac and 30.0 amperes dc single location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

3500.0 ac and 6000.0 dc single location

Mounting Facility Type And Quantity

1 threaded bushing

Mounting Surface To Terminal End Distance

1.860 inches maximum

Nominal Thread Size

0.469 inches

Operating Voltage Type And Rating Per Pole In Volts

120.0 ac and 30.0 dc single location

Pole Quantity

1

Reset Method

manual

Storage Type

general purpose warehouse

Terminal Type And Quantity

2 tab w/screw

Test Data Document

36659-613499 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Thread Quantity Per Inch

32

Thread Series Designator

uns

Trip Release Ambient Temp Rating

25.0 celsius nominal single location

Trip Release Characteristic

time delay single location

Trip Release Method

thermal single location

Trip Delay Time In Seconds Per Rated Continuous Current

15.000 minimum at 200 pct and 55.000 maximum at 200 pct single location

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

138.0 single location

Unpackaged Unit Weight

43.0 grams nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

98897

Lockheed Martin Corp Dba Lockheed Martin Aerostructures Div Lockheed Martin Aeronautics Company

U.s./canadian manufacturers

81640

Safran Power Usa, Llc

U.s./canadian manufacturers

76374

Safran Electrical & Power Usa, Llc Dba Labinal Power Sysyems Use Cage Code 81640 for Cataloging

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-00-581-3926?

   The FSCG of the NSN 5925-00-581-3926 is 5925

2. Does the NSN 5925-00-581-3926 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-00-581-3926 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-00-581-3926 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-00-581-3926 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-00-581-3926 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963