NSN MS18062N20

0.797 inches minimum and 0.807 inches maximum distance from mounting shoulder to front face, 1.250 inches nominal center to center distance between mounting facilities parallel to height, 1.250 inches nominal distance between centerlines of mounting facilities parallel to body width, externally threaded shell connector locking method, straight shape, external coupling body style.

NSN 5935-01-299-5556 Datasheet

(NSN) National Stock Number

5935-01-299-5556

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-299-5556

Requires Demilitarization

Yes

(INC) Item Name Code

15092

Date

Wed, May 3, 1989

Schedule B Code

8548900100

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

1.250 inches nominal

Connector Locking Method

externally threaded shell

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.250 inches nominal

Distance From Mounting Shoulder To Front Face

0.797 inches minimum and 0.807 inches maximum

Environmental Protection

thermal shock resistant and moisture resistant and salt water resistant and shock resistant and vibration resistant

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Length

0.672 inches

Nominal Thread Size

1.375 inches

Overall Height

1.605 inches minimum and 1.646 inches maximum

Overall Length

0.943 inches minimum and 0.974 inches maximum

Overall Width

1.605 inches minimum and 1.646 inches maximum

Polarization Method

keyway or multiple keyway

Shell Surface Treatment Document And Classification

mil-f-14072,e-516 mil spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

oxide

Shell Type

solid

Specification/Standard Data

96906-ms18062 government standard

Test Data Document

"81349-mil-c-22992 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

10

Thread Series Designator

double stub

Threaded Device Type

coupling facility

Unthreaded Mounting Hole Diameter

0.172 inches minimum and 0.182 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015092

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-01-299-5556?

   The FSCG of the NSN 5935-01-299-5556 is 5935

2. Does the NSN 5935-01-299-5556 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-299-5556 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-299-5556 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-299-5556 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-299-5556 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Wed, May 3, 1989