NSN MS26574-20A

A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.

1 alarm auxiliary switch function and quantity, magnetic blowout arc quenching method, 0.780 inches maximum body length, at pole one actuator position designation, trip-reset actuator function.

NSN 5925-01-341-0728 Datasheet

(NSN) National Stock Number

5925-01-341-0728

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-341-0728

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Mon, Jun 24, 1991

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole one

Arc Quenching Method

magnetic blowout

Auxiliary Switch Function And Quantity

1 alarm

Body Length

0.780 inches maximum

Body Style

single pole type

Body Width

0.593 inches maximum

Bushing Length

0.250 inches nominal

Center To Center Distance Between Terminals Parallel To Length

0.593 inches nominal

Circuit Protection Type

overcurrent single location

Fragility Factor

moderately rugged

Frequency In Hertz

400.0 single location

Inclosure Protection Type For Which Designed

dustproof

Internal Trip Release Configuration

series trip single location

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 push-pull

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

20.0 amperes ac and 20.0 amperes dc single location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

500.0 ac and 500.0 dc single location

Mounting Facility Type And Quantity

1 threaded bushing

Mounting Surface To Terminal End Distance

1.525 inches maximum

Nominal Thread Size

0.438 inches

Operating Voltage Type And Rating Per Pole In Volts

200.0 ac and 28.0 dc single location

Pole Quantity

1

Reset Method

manual

Special Handling Feature

magnetic

Specification/Standard Data

96906-ms26574 government standard

Storage Type

general purpose warehouse

Switch Location And Position Designation

internal at pole one

Switch Terminal Type

tab, solder lug

Switch Voltage Rating And Type In Volts

200.0 ac and 28.0 dc

Switch Contact Arrangement

single pole, double throw

Switch Current Rating And Type In Amps

3.0 ac and 5.0 dc

Terminal Type And Quantity

2 tab w/screw

Test Data Document

"81349-mil-c-5809 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Quantity Per Inch

32

Thread Series Designator

un

Trip Release Characteristic

time delay single location

Trip Release Method

magnetic single location

Trip Delay Time In Seconds Per Rated Continuous Current

2.000 minimum at 200 pct and 20.000 maximum at 200 pct single location

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

150.0 single location

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

76374

Safran Electrical & Power Usa, Llc Dba Labinal Power Sysyems Use Cage Code 81640 for Cataloging

U.s./canadian manufacturers

81640

Safran Power Usa, Llc

U.s./canadian manufacturers

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-341-0728?

   The FSCG of the NSN 5925-01-341-0728 is 5925

2. Does the NSN 5925-01-341-0728 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-341-0728 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-341-0728 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-341-0728 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-341-0728 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Mon, Jun 24, 1991