NSN MS27336P8A3SD

An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes:undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.

8-3 single mating end contact position arrangement style, copper alloy single mating end single contact grouping contact material, straight shape, external coupling body style, bayonet pin connector locking method, nonremovable single mating end single contact grouping contact removability.

NSN 5935-01-323-5789 Datasheet

(NSN) National Stock Number

5935-01-323-5789

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-323-5789

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Tue, Jul 31, 1990

Schedule B Code

8536695050

Body Style

straight shape, external coupling

Connector Locking Method

bayonet pin

Contact Material

copper alloy single mating end single contact grouping

Contact Position Arrangement Style

8-3 single mating end

Contact Removability

nonremovable single mating end single contact grouping

Contact Surface Treatment Document And Classification

mil-g-45204 mil spec 1st treatment response and qq-s-365 fed spec 2nd treatment response single mating end single contact grouping

Contact Surface Treatment

gold and silver single mating end single contact grouping

Environmental Protection

moisture proof and vibration proof

Included Contact Quantity

3 single mating end single contact grouping

Included Contact Type

round socket single mating end single contact grouping

Insert Material

resin synthetic single mating end

Insert Position In Deg

15.0 and 100.0 and 128.0 and 228.0 and 265.0

Mating End Quantity

1

Nominal Thread Size

1.312 inches

Overall Diameter

1.641 inches maximum

Overall Length

0.797 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold and contact surfaces silver

Precious Material

gold and silver

Precious Material And Weight

0.020 gold grains, troy and 0.020 silver grains, troy

Shell Surface Treatment Document And Classification

qq-p-416,ty 2 fed spec 1st treatment response and qq-p-416,ty 2 fed spec 2nd treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium and chromate and nickel

Shell Type

solid

Specification/Standard Data

96906-ms27336 government standard

Terminal Location

back single mating end single contact grouping

Terminal Type

solder well single mating end single contact grouping

Test Data Document

"81349-mil-c-27599 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

unef

Threaded Device Type

back shell

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-323-5789?

   The FSCG of the NSN 5935-01-323-5789 is 5935

2. Does the NSN 5935-01-323-5789 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-323-5789 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-323-5789 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5935-01-323-5789 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-323-5789 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Tue, Jul 31, 1990