NSN MS27466E11B35S

A definite continuous length of flat electrical cable consisting of two or more deposited, etched, or printed conductive paths laminated between insulating films and having one or more ends processed or terminated with facilities which provide for connection to other items. It may also provide facilities for connections to other items at locations other than the ends of the cable. For items with solid and/or stranded conductors, see cable (as modified); cable assembly (as modified); and wiring harness (as modified). For rigid items consisting only of electrical conductor paths and two or more connectors, see backplane assembly. See also printed circuit board and printed wiring board.

0.812 inches nominal center to center distance between mounting facilities parallel to height, unable to decode contact material, straight shape, external coupling body style, bayonet pin connector locking method, unable to decode contact position arrangement style.

NSN 5935-01-080-6230 Datasheet

(NSN) National Stock Number

5935-01-080-6230

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-080-6230

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Sun, Jul 29, 1979

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

0.812 inches nominal

Connector Locking Method

bayonet pin

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Surface Treatment

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.812 inches nominal

Distance From Mounting Shoulder To Front Face

0.628 inches minimum and 0.632 inches maximum

Environmental Protection

moisture proof and salt water resistant and vibration proof

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Position In Deg

0.0

Mating End Quantity

1

Overall Height

1.031 inches nominal

Overall Length

1.158 inches minimum and 1.163 inches maximum

Overall Width

1.031 inches nominal

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold and contact surfaces silver

Precious Material

gold and silver

Precious Material And Weight

0.013 gold grains, troy and 0.013 silver grains, troy

Shell Surface Treatment Document And Classification

qq-p-416 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Specification/Standard Data

96906-ms27466 government standard

Terminal Location

unable to decode

Terminal Type

unable to decode

Test Data Document

"81349-mil-c-38999 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unthreaded Mounting Hole Diameter

0.123 inches minimum and 0.138 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-080-6230?

   The FSCG of the NSN 5935-01-080-6230 is 5935

2. Does the NSN 5935-01-080-6230 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-080-6230 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-080-6230 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-080-6230 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-080-6230 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Sun, Jul 29, 1979