NSN MS27484T14F35PC

A switch that is externally actuated by a device such as a push rod or button, which requires pushing for each actuation. The action may be momentary, with mechanical return. It consists of a body,switch and a push button. The item may include provisions for mounting indicating lamps or light emitting diodes in the actuator. Includes items consisting of individually separable switches that are physically interlocked, that have a common actuator, or are electrically connected. Excludes: light-switch; light-switch assembly; switch,beam selecting,headlight; switch,foot; switch,interlock; switch,pressure; switch,push-pull; switch,sensitive and switch assembly. For devices which start, stop, reverse, select and/or regulate the speed of a motor, see starter,motor and controller,motor.

removable single mating end single contact grouping contact removability, copper alloy single mating end single contact grouping contact material, straight shape, internal coupling w/backshell body style, bayonet latch connector locking method, 14-35 single mating end contact position arrangement style.

NSN 5935-01-092-4260 Datasheet

(NSN) National Stock Number

5935-01-092-4260

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-092-4260

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Wed, Mar 26, 1980

Schedule B Code

8536695050

Body Style

straight shape, internal coupling w/backshell

Connector Locking Method

bayonet latch

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

removable single mating end single contact grouping

Contact Position Arrangement Style

14-35 single mating end

Contact Surface Treatment

gold and silver single mating end single contact grouping

Environmental Protection

moisture proof and salt water resistant and vibration proof

Included Contact Quantity

37 single mating end single contact grouping

Included Contact Type

round pin single mating end single contact grouping

Insert Position In Deg

326.0

Mating End Quantity

1

Nominal Thread Length

0.219 inches

Nominal Thread Size

0.812 inches

Overall Diameter

1.156 inches maximum

Overall Length

0.766 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold and contact surfaces silver

Precious Material

gold and silver

Precious Material And Weight

0.037 gold grains, troy and 0.037 silver grains, troy

Shell Material

aluminum alloy

Shell Surface Treatment Document And Classification

mil-c-26074,cl 3 or 4,grade b mil spec single treatment response

Shell Surface Treatment

nickel

Shell Type

solid

Specification/Standard Data

96906-ms27484 government standard

Terminal Location

back single mating end single contact grouping

Terminal Type

crimp single mating end single contact grouping

Test Data Document

"81349-mil-c-38999 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

20

Thread Series Designator

unef

Threaded Device Type

back shell

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-092-4260?

   The FSCG of the NSN 5935-01-092-4260 is 5935

2. Does the NSN 5935-01-092-4260 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-092-4260 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-092-4260 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5935-01-092-4260 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-092-4260 was assigned to the Federal Catalog?

   It was assigned 46 years ago, on Wed, Mar 26, 1980