NSN MS27496E19F35BC

A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.

unable to decode contact position arrangement style, bayonet pin connector locking method, 1.156 inches nominal center to center distance between mounting facilities parallel to height, 1.156 inches nominal distance between centerlines of mounting facilities parallel to body width, straight shape, external coupling body style.

NSN 5935-01-305-4365 Datasheet

(NSN) National Stock Number

5935-01-305-4365

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-305-4365

Requires Demilitarization

Yes

(INC) Item Name Code

61925

Date

Sat, Aug 5, 1989

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

1.156 inches nominal

Connector Locking Method

bayonet pin

Contact Position Arrangement Style

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.156 inches nominal

Distance From Mounting Shoulder To Front Face

0.627 inches minimum and 0.632 inches maximum

Environmental Protection

moisture proof and salt water resistant and vibration proof and corrosion resistant and dust resistant and fuel resistant and fungus resistant and humidity resistant and oil resistant and shock resistant and thermal shock resistant and vibration resistant

Insert Material

unable to decode

Insert Position In Deg

30.0 and 95.0 and 132.0 and 232.0 and 260.0

Mating End Quantity

1

Operating Temp Rating

-65.0 celsius minimum and 200.0 celsius maximum

Overall Height

1.418 inches minimum and 1.458 inches maximum

Overall Length

1.029 inches nominal

Overall Width

1.418 inches minimum and 1.458 inches maximum

Polarization Method

keyway or multiple keyway

Shell Material

aluminum alloy

Shell Surface Treatment Document And Classification

mil-c-26074,cl 3 or 4,grade b mil spec single treatment response

Shell Surface Treatment

nickel

Shell Type

solid

Specification/Standard Data

96906-ms27496 government standard

Test Data Document

"81349-mil-c-38999 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unthreaded Mounting Hole Diameter

0.123 inches minimum and 0.138 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061925

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-305-4365?

   The FSCG of the NSN 5935-01-305-4365 is 5935

2. Does the NSN 5935-01-305-4365 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-305-4365 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-305-4365 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-305-4365 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-305-4365 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Sat, Aug 5, 1989