NSN MS27505E25B43A

An item generally consisting of one or more turns of wire or similar conductive material (in special cases it may be considered as a partial turn). It is specifically designed to concentrate magnetic flux generated by the flow of an electric current, to induce in itself an electromotive force, and to add or subtract inductive reactance in a circuit. It may include tuning devices, integral resistors and capacitors; however, excludes:filter (as modified). For coils wound on resistors which are designed to be inserted into the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see suppressor, parasitic..

straight shape, external coupling body style, bayonet pin connector locking method, unable to decode contact position arrangement style, 1.500 inches nominal center to center distance between mounting facilities parallel to height, 1.500 inches nominal distance between centerlines of mounting facilities parallel to body width.

NSN 5935-01-337-7091 Datasheet

(NSN) National Stock Number

5935-01-337-7091

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-337-7091

Requires Demilitarization

Yes

(INC) Item Name Code

61925

Date

Sun, Apr 21, 1991

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

1.500 inches nominal

Connector Locking Method

bayonet pin

Contact Position Arrangement Style

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.500 inches nominal

Distance From Mounting Shoulder To Front Face

0.785 inches minimum and 0.790 inches maximum

Environmental Protection

moisture proof and salt water resistant and vibration proof and corrosion resistant and dust resistant and fuel resistant and fungus resistant and humidity resistant and oil resistant and shock resistant and thermal shock resistant and vibration resistant

Insert Material

unable to decode

Insert Position In Deg

0.0 and 95.0 and 132.0 and 232.0 and 260.0

Mating End Quantity

1

Operating Temp Rating

-65.0 celsius minimum and 175.0 celsius maximum

Overall Height

1.812 inches minimum and 1.832 inches maximum

Overall Length

1.100 inches maximum

Overall Width

1.812 inches minimum and 1.832 inches maximum

Polarization Method

key, multiple key groove

Shell Surface Treatment Document And Classification

qq-p-416 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Specification/Standard Data

96906-ms27505 government standard

Test Data Document

"81349-mil-c-38999 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unthreaded Mounting Hole Diameter

0.142 inches minimum and 0.157 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061925

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-337-7091?

   The FSCG of the NSN 5935-01-337-7091 is 5935

2. Does the NSN 5935-01-337-7091 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-337-7091 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-337-7091 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-01-337-7091 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-337-7091 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Sun, Apr 21, 1991