NSN MS27508E24F35A

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

bayonet pin connector locking method, straight shape, external coupling body style, 1.375 inches nominal distance between centerlines of mounting facilities parallel to body width, 1.375 inches nominal center to center distance between mounting facilities parallel to height, unable to decode contact position arrangement style.

NSN 5935-01-336-6415 Datasheet

(NSN) National Stock Number

5935-01-336-6415

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-336-6415

Requires Demilitarization

Yes

(INC) Item Name Code

61925

Date

Sun, Mar 31, 1991

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

1.375 inches nominal

Connector Locking Method

bayonet pin

Contact Position Arrangement Style

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.375 inches nominal

Distance From Mounting Shoulder To Front Face

0.442 inches minimum and 0.447 inches maximum

Environmental Protection

moisture proof and salt water resistant and vibration proof and corrosion resistant and dust resistant and fuel resistant and fungus resistant and humidity resistant and oil resistant and shock resistant and thermal shock resistant and vibration resistant

Insert Material

unable to decode

Insert Position In Deg

0.0 and 100.0 and 128.0 and 228.0 and 265.0

Mating End Quantity

1

Operating Temp Rating

-65.0 celsius minimum and 200.0 celsius maximum

Overall Height

1.703 inches maximum

Overall Length

0.697 inches nominal

Overall Width

1.703 inches maximum

Polarization Method

keyway or multiple keyway

Shell Material

aluminum alloy

Shell Surface Treatment Document And Classification

mil-c-26074,cl 3 or 4,grade b mil spec single treatment response

Shell Surface Treatment

nickel

Shell Type

solid

Specification/Standard Data

96906-ms27508 government standard

Test Data Document

"81349-mil-c-38999 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unthreaded Mounting Hole Diameter

0.142 inches minimum and 0.157 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061925

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-336-6415?

   The FSCG of the NSN 5935-01-336-6415 is 5935

2. Does the NSN 5935-01-336-6415 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-336-6415 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-336-6415 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-336-6415 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-336-6415 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Sun, Mar 31, 1991