NSN MS27508E8B6S

A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. See also locknut, tube fitting. For items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

bayonet pin connector locking method, 0.594 inches nominal center to center distance between mounting facilities parallel to height, unable to decode contact material, straight shape, external coupling body style, unable to decode contact position arrangement style.

NSN 5935-00-331-7771 Datasheet

(NSN) National Stock Number

5935-00-331-7771

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-331-7771

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Sun, Dec 16, 1973

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

0.594 inches nominal

Connector Locking Method

bayonet pin

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Surface Treatment Document And Classification

unable to decode

Contact Surface Treatment

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.594 inches nominal

Distance From Mounting Shoulder To Front Face

0.442 inches minimum and 0.447 inches maximum

Environmental Protection

moisture proof and salt water resistant and vibration resistant

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Position In Deg

0.0 and 95.0 and 132.0 and 232.0 and 260.0

Mating End Quantity

1

Operating Temp Rating

-65.0 celsius minimum and 175.0 celsius maximum

Overall Height

1.656 inches maximum

Overall Length

0.697 inches maximum

Overall Width

1.656 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.030 gold grains, troy

Shell Surface Treatment Document And Classification

qq-p-416 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Specification/Standard Data

96906-ms27508 government standard

Terminal Location

unable to decode

Terminal Type

unable to decode

Test Data Document

"81349-mil-c-38999 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unthreaded Mounting Hole Diameter

0.115 inches minimum and 0.130 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-00-331-7771?

   The FSCG of the NSN 5935-00-331-7771 is 5935

2. Does the NSN 5935-00-331-7771 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-00-331-7771 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-331-7771 contain precious materials?

   Item contains gold.

5. Does NSN 5935-00-331-7771 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-331-7771 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Sun, Dec 16, 1973