NSN MS3102R36-7PY

A fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a pipe or pipe fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. See also elbow, pipe; and elbow, pipe to tube. Excludes:connector, multiple, fluid pressure line.

externally threaded shell connector locking method, straight shape, external coupling body style, unable to decode contact position arrangement style, 1.938 inches nominal center to center distance between mounting facilities parallel to height, unable to decode contact material.

NSN 5935-01-261-8555 Datasheet

(NSN) National Stock Number

5935-01-261-8555

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-261-8555

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Wed, Aug 19, 1987

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

1.938 inches nominal

Connector Locking Method

externally threaded shell

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Ac Voltage Rating In Volts

unable to decode

Contact Maximum Current Rating In Amps

unable to decode

Contact Maximum Dc Voltage Rating In Volts

unable to decode

Contact Surface Treatment Document And Classification

unable to decode

Contact Surface Treatment

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.938 inches nominal

Distance From Mounting Shoulder To Front Face

0.875 inches minimum and 0.906 inches maximum

Environmental Protection

moisture proof and salt water resistant and vibration proof

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material

unable to decode

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Length

0.625 inches

Nominal Thread Size

2.250 inches

Overall Height

2.500 inches nominal

Overall Length

1.662 inches maximum

Overall Width

2.500 inches nominal

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.075 gold grains, troy

Shell Surface Treatment Document And Classification

qq-p-416,ty 2,class 3 fed spec all treatment responses

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium and chromate

Shell Type

solid

Specification/Standard Data

96906-ms3452 government standard

Terminal Location

unable to decode

Terminal Type

unable to decode

Test Data Document

"81349-mil-c-5015 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

16

Thread Series Designator

un

Threaded Device Type

coupling facility

Unthreaded Mounting Hole Diameter

0.168 inches minimum and 0.183 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-261-8555?

   The FSCG of the NSN 5935-01-261-8555 is 5935

2. Does the NSN 5935-01-261-8555 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-261-8555 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-261-8555 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-261-8555 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-261-8555 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Wed, Aug 19, 1987