NSN MS3115-14B

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

bayonet pin connector locking method, 1.031 inches nominal center to center distance between mounting facilities parallel to height, 1.031 inches nominal distance between centerlines of mounting facilities parallel to body width, moisture resistant and salt water resistant and vibration resistant environmental protection, 0.462 inches minimum and 0.493 inches maximum distance from mounting shoulder to front face.

NSN 5935-00-226-7765 Datasheet

(NSN) National Stock Number

5935-00-226-7765

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-226-7765

Requires Demilitarization

Yes

(INC) Item Name Code

15092

Date

Tue, Jan 1, 1963

Schedule B Code

8548900100

Center To Center Distance Between Mounting Facilities Parallel To Height

1.031 inches nominal

Connector Locking Method

bayonet pin

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.031 inches nominal

Distance From Mounting Shoulder To Front Face

0.462 inches minimum and 0.493 inches maximum

Environmental Protection

moisture resistant and salt water resistant and vibration resistant

Insert Material

unable to decode

Mating End Quantity

1

Overall Height

1.360 inches maximum

Overall Length

0.524 inches nominal

Overall Width

1.360 inches maximum

Shell Surface Treatment Document And Classification

qq-p-416,ty 2,cl 3 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Test Data Document

"81349-mil-c-26482 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unthreaded Mounting Hole Diameter

0.115 inches minimum and 0.125 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0015092

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-00-226-7765?

   The FSCG of the NSN 5935-00-226-7765 is 5935

2. Does the NSN 5935-00-226-7765 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-00-226-7765 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-226-7765 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-226-7765 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-226-7765 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963