NSN MS3115-24

A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes:transformer (1), pulse.

1.375 inches nominal distance between centerlines of mounting facilities parallel to body width, moisture resistant and salt water resistant and vibration resistant environmental protection, 1.375 inches nominal center to center distance between mounting facilities parallel to height, 0.589 inches minimum and 0.620 inches maximum distance from mounting shoulder to front face, bayonet pin connector locking method.

NSN 5935-00-532-1708 Datasheet

(NSN) National Stock Number

5935-00-532-1708

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-532-1708

Requires Demilitarization

Yes

(INC) Item Name Code

15092

Date

Wed, Jun 18, 1969

Schedule B Code

8548900100

Center To Center Distance Between Mounting Facilities Parallel To Height

1.375 inches nominal

Connector Locking Method

bayonet pin

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.375 inches nominal

Distance From Mounting Shoulder To Front Face

0.589 inches minimum and 0.620 inches maximum

Environmental Protection

moisture resistant and salt water resistant and vibration resistant

Insert Material

unable to decode

Mating End Quantity

1

Overall Height

1.703 inches maximum

Overall Length

0.683 inches nominal

Overall Width

1.703 inches maximum

Shell Surface Treatment Document And Classification

qq-p-416,ty 2,cl 3 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Specification/Standard Data

96906-ms3115 government standard

Test Data Document

"81349-mil-c-26482 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unthreaded Mounting Hole Diameter

0.142 inches minimum and 0.152 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015092

Cross Reference

CAGE Codes

A486G

Nimikkeistokeskus Ncb Finland

Government departments or units, including military organizations

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-00-532-1708?

   The FSCG of the NSN 5935-00-532-1708 is 5935

2. Does the NSN 5935-00-532-1708 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-00-532-1708 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-532-1708 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-532-1708 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-532-1708 was assigned to the Federal Catalog?

   It was assigned 57 years ago, on Wed, Jun 18, 1969