NSN MS3116E8-4SWSR

An item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. It may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. It is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. It may include tuning devices, integral resistors and capacitors; however, excludes:filter (as modified). The coil has only two electrical terminals. For items having tapped winding or more than one winding - see transformer, radio frequency. For coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see suppressor, parasitic.

0.234 inches maximum cable entrance diameter, straight shape, internal coupling w/strain relief body style, cable clamp connector cable strain relief method, bayonet latch connector locking method, 1.828 inches maximum body length.

NSN 5935-00-904-4897 Datasheet

(NSN) National Stock Number

5935-00-904-4897

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-904-4897

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Fri, Jan 1, 1960

Schedule B Code

8536695050

Body Length

1.828 inches maximum

Body Style

straight shape, internal coupling w/strain relief

Cable Entrance Diameter

0.234 inches maximum

Connector Cable Strain Relief Method

cable clamp

Connector Locking Method

bayonet latch

Contact Position Arrangement Style

8-4 single mating end

Contact Removability

nonremovable single mating end single contact grouping

Contact Maximum Ac Voltage Rating In Volts

600.0 single mating end single contact grouping

Contact Surface Treatment

gold and copper single mating end single contact grouping

Environmental Protection

moisture resistant and salt water resistant and vibration resistant

Included Contact Quantity

4 single mating end single contact grouping

Included Contact Type

round socket single mating end single contact grouping

Insert Position In Deg

45.0

Mating End Quantity

1

Overall Diameter

0.750 inches maximum

Polarization Method

key, multiple key groove

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.020 gold grains, troy

Shell Surface Treatment Document And Classification

qq-p-416,ty 2,cl 3 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Specification/Standard Data

81349-mil-c-26482 government specification

Terminal Location

back single mating end single contact grouping

Terminal Type

solder well single mating end single contact grouping

Test Data Document

"81349-mil-c-26482 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-904-4897?

   The FSCG of the NSN 5935-00-904-4897 is 5935

2. Does the NSN 5935-00-904-4897 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-904-4897 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-904-4897 contain precious materials?

   Item contains gold.

5. Does NSN 5935-00-904-4897 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-904-4897 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960