NSN MS3126

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

3 single mating end single contact grouping included contact quantity, round pin single mating end single contact grouping included contact type, 2.412 inches nominal body length, straight shape, internal coupling w/strain relief body style, 8-33 single mating end contact position arrangement style.

NSN 5935-01-233-9800 Datasheet

(NSN) National Stock Number

5935-01-233-9800

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-233-9800

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Thu, Jun 5, 1986

Schedule B Code

8536695050

Body Length

2.412 inches nominal

Body Style

straight shape, internal coupling w/strain relief

Contact Position Arrangement Style

8-33 single mating end

Included Contact Quantity

3 single mating end single contact grouping

Included Contact Type

round pin single mating end single contact grouping

Insert Position In Deg

90.0

Mating End Quantity

1

Overall Diameter

0.781 inches nominal

Polarization Method

keyway or multiple keyway

Specification/Standard Data

96906-ms3126 government standard

Terminal Type

crimp single mating end single contact grouping

Test Data Document

96906-ms3126 standard (includes industry or association standards, individual manufactureer standards, etc.).

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

71468

Itt Cannon Llc

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-233-9800?

   The FSCG of the NSN 5935-01-233-9800 is 5935

2. Does the NSN 5935-01-233-9800 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-233-9800 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-233-9800 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-01-233-9800 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-233-9800 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Thu, Jun 5, 1986