NSN MS3126E20-41PY

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

600.0 single mating end single contact grouping contact maximum ac voltage rating in volts, bayonet latch connector locking method, straight shape, internal coupling w/backshell body style, 20-41 single mating end contact position arrangement style, removable single mating end single contact grouping contact removability.

NSN 5935-01-481-6696 Datasheet

(NSN) National Stock Number

5935-01-481-6696

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-481-6696

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Thu, Jan 18, 2001

Schedule B Code

8536695050

Body Style

straight shape, internal coupling w/backshell

Connector Locking Method

bayonet latch

Contact Removability

removable single mating end single contact grouping

Contact Maximum Ac Voltage Rating In Volts

600.0 single mating end single contact grouping

Contact Position Arrangement Style

20-41 single mating end

Contact Surface Treatment

gold and cadmium single mating end single contact grouping

Environmental Protection

moisture resistant and salt water resistant and vibration resistant

Included Contact Quantity

41 single mating end single contact grouping

Included Contact Type

round pin single mating end single contact grouping

Insert Position In Deg

45.0

Mating End Quantity

1

Overall Diameter

1.638 inches maximum

Overall Length

1.531 inches maximum

Polarization Method

key, multiple key groove

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.041 gold grains, troy

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Specification/Standard Data

81349-mil-c-26482 government specification

Terminal Location

back single mating end single contact grouping

Terminal Type

crimp single mating end single contact grouping

Test Data Document

"81349-mil-c-26482 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-481-6696?

   The FSCG of the NSN 5935-01-481-6696 is 5935

2. Does the NSN 5935-01-481-6696 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-481-6696 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-481-6696 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-481-6696 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-481-6696 was assigned to the Federal Catalog?

   It was assigned 25 years ago, on Thu, Jan 18, 2001