NSN MS3188A63A

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. Excludes:bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

2.106 inches nominal distance from centerline to connector end, 0.875 inches minimum and 1.250 inches maximum cable opening diameter, 90.0 body angle in deg, 5.000 inches nominal distance from centerline to cable end, 1 cable opening quantity.

NSN 5935-01-262-1032 Datasheet

(NSN) National Stock Number

5935-01-262-1032

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-262-1032

Requires Demilitarization

Yes

(INC) Item Name Code

67169

Date

Sat, Aug 22, 1987

Schedule B Code

8548900100

Body Angle In Deg

90.0

Cable Opening Diameter

0.875 inches minimum and 1.250 inches maximum

Cable Opening Quantity

1

Distance From Centerline To Cable End

5.000 inches nominal

Distance From Centerline To Connector End

2.106 inches nominal

Material

aluminum alloy

Mounting Facility Type And Quantity

1 threaded coupling

Nominal Thread Length

0.290 inches

Nominal Thread Size

1.750 inches

Overall Width

2.469 inches maximum

Seal Type

grommet

Size Designation

36

Specification/Standard Data

81349-mil-c-85049/8 government specification

Style Designator

angle type w/clamp

Surface Treatment

cadmium and chromate

Test Data Document

"81349-mil-c-85049 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

uns

Seal Material

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0067169

Cross Reference

CAGE Codes

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

28199

L3 Technologies, Inc.

U.s./canadian manufacturers

81343

Society of Automotive Engineers Inc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-01-262-1032?

   The FSCG of the NSN 5935-01-262-1032 is 5935

2. Does the NSN 5935-01-262-1032 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-262-1032 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-262-1032 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-262-1032 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-262-1032 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Sat, Aug 22, 1987