NSN MS3400D20-27EW

A switch that is externally actuated by a device such as a push rod or button, which requires pushing for each actuation. The action may be momentary, with mechanical return. It consists of a body,switch and a push button. The item may include provisions for mounting indicating lamps or light emitting diodes in the actuator. Includes items consisting of individually separable switches that are physically interlocked, that have a common actuator, or are electrically connected. Excludes: light-switch; light-switch assembly; switch,beam selecting,headlight; switch,foot; switch,interlock; switch,pressure; switch,push-pull; switch,sensitive and switch assembly. For devices which start, stop, reverse, select and/or regulate the speed of a motor, see starter,motor and controller,motor.

straight shape, external coupling body style, 1.156 inches nominal center to center distance between mounting facilities parallel to height, unable to decode contact position arrangement style, unable to decode contact material, externally threaded shell connector locking method.

NSN 5935-01-320-5751 Datasheet

(NSN) National Stock Number

5935-01-320-5751

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-320-5751

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Sun, May 27, 1990

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

1.156 inches nominal

Connector Locking Method

externally threaded shell

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Ac Voltage Rating In Volts

unable to decode

Contact Maximum Current Rating In Amps

unable to decode

Contact Maximum Dc Voltage Rating In Volts

unable to decode

Contact Surface Treatment Document And Classification

Contact Surface Treatment

Criticality Code Justification

feat

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.156 inches nominal

Distance From Mounting Shoulder To Front Face

0.750 inches minimum and 0.781 inches maximum

Environmental Protection

moisture proof and salt water resistant and vibration proof and shock resistant and cold resistant and heat resistant and explosion proof

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material

unable to decode

Insert Position In Deg

35.0

Mating End Quantity

1

Nominal Thread Size

1.188 inches and 1.250 inches

Operating Temp Rating

-55.0 celsius minimum and 200.0 celsius maximum

Overall Height

1.500 inches nominal

Overall Length

2.125 inches maximum

Overall Width

1.500 inches nominal

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.010 gold grains, troy

Shell Surface Treatment Document And Classification

qq-p-416,type 2,class 3 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Special Features

16-22 wire size socket contacts in lieu of 16-16; in order to complete the connector assembly,the user must obtain/provide the backshell. standard versions may be ordered as nsn 5935-01-183-6491,p/n m85049/52-1-18w for the straight style,or nsn 5935-01-186-5610,p/n m85049/51-1-18w for the right angle style

Specification/Standard Data

96906-ms3400 government standard

Terminal Location

unable to decode

Terminal Type

unable to decode

Test Data Document

"81349-mil-c-5015 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

unef

Threaded Device Type

back shell and coupling facility

Unthreaded Mounting Hole Diameter

0.115 inches minimum and 0.130 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-320-5751?

   The FSCG of the NSN 5935-01-320-5751 is 5935

2. Does the NSN 5935-01-320-5751 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-320-5751 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-320-5751 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-320-5751 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-320-5751 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Sun, May 27, 1990