NSN MS3402DS18-22P

A device of various shapes to be permanently attached to the structure of an aircraft. It is designed to permanently mount and/or support an integral member, or group of members of the airframe in a proper position and bear the stress imposed by the components being supported. It may have mounting provisions, such as slots, holes, and/or attachments to facilitate installation. Excludes:items which are primarily designed for dampening shock and/or vibration. Excludes:bracket, angle; bracket, double angle; bracket, shelf; bracket, mounting; bracket (1), structural component, aircraft; and radius block.

unable to decode contact position arrangement style, externally threaded shell connector locking method, 1.062 inches nominal center to center distance between mounting facilities parallel to height, straight shape, external coupling body style, unable to decode contact material.

NSN 5935-01-306-2385 Datasheet

(NSN) National Stock Number

5935-01-306-2385

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-306-2385

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Sat, Aug 19, 1989

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

1.062 inches nominal

Connector Locking Method

externally threaded shell

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Ac Voltage Rating In Volts

unable to decode

Contact Maximum Current Rating In Amps

unable to decode

Contact Maximum Dc Voltage Rating In Volts

unable to decode

Contact Surface Treatment Document And Classification

unable to decode

Contact Surface Treatment

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.062 inches nominal

Distance From Mounting Shoulder To Front Face

0.750 inches minimum and 0.781 inches maximum

Environmental Protection

moisture proof and salt water resistant and vibration proof and shock resistant and cold resistant and heat resistant and explosion proof

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material

unable to decode

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Length

0.625 inches

Nominal Thread Size

1.125 inches

Operating Temp Rating

-55.0 celsius minimum and 200.0 celsius maximum

Overall Height

1.344 inches minimum and 1.406 inches maximum

Overall Length

1.662 inches maximum

Overall Width

1.344 inches minimum and 1.406 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.003 gold grains, troy

Shell Material

steel corrosion resisting

Shell Type

solid

Specification/Standard Data

96906-ms3402 government standard

Terminal Location

unable to decode

Terminal Type

unable to decode

Test Data Document

"81349-mil-c-5015 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

unef

Threaded Device Type

coupling facility

Unthreaded Mounting Hole Diameter

0.115 inches minimum and 0.130 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

70508

American Metal Bearing Co Dba Amb Engineering & Machining Solutions

U.s./canadian manufacturers

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-306-2385?

   The FSCG of the NSN 5935-01-306-2385 is 5935

2. Does the NSN 5935-01-306-2385 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-306-2385 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-306-2385 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-306-2385 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-306-2385 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Sat, Aug 19, 1989