NSN MS3406DJS40D56S

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

internally threaded coupling ring connector locking method, cable clamp connector cable strain relief method, 1.250 inches minimum and 1.625 inches maximum cable entrance diameter, straight shape, internal coupling w/strain relief body style, 7.688 inches maximum body length.

NSN 5935-01-317-3057 Datasheet

(NSN) National Stock Number

5935-01-317-3057

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-317-3057

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Tue, Mar 27, 1990

Schedule B Code

8536695050

Body Length

7.688 inches maximum

Body Style

straight shape, internal coupling w/strain relief

Cable Entrance Diameter

1.250 inches minimum and 1.625 inches maximum

Connector Cable Strain Relief Method

cable clamp

Connector Locking Method

internally threaded coupling ring

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

removable single mating end single contact grouping

Contact Maximum Ac Voltage Rating In Volts

500.0 single mating end single contact grouping

Contact Maximum Current Rating In Amps

22.0 single mating end single contact grouping

Contact Maximum Dc Voltage Rating In Volts

700.0 single mating end single contact grouping

Contact Position Arrangement Style

40-56 single mating end

Contact Surface Treatment Document And Classification

mil-g-45204,ty 2,grade c,cl 1 mil spec 1st treatment response and qq-n-290,cl 2 fed spec 2nd treatment response single mating end single contact grouping

Contact Surface Treatment

gold and nickel single mating end single contact grouping

Environmental Protection

moisture proof and salt water resistant and vibration proof and shock resistant and cold resistant and heat resistant and explosion proof

Included Contact Quantity

85 single mating end single contact grouping

Included Contact Type

round socket single mating end single contact grouping

Insert Material

rubber silicone class q single mating end

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Size

2.500 inches

Operating Temp Rating

-55.0 celsius minimum and 175.0 celsius maximum

Overall Diameter

2.770 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.085 gold grains, troy

Shell Surface Treatment Document And Classification

qq-p-416,ty 2,cl 3 fed spec all treatment responses

Shell Material Document And Classification

qq-s-763 fed spec single material response

Shell Material

steel corrosion resisting

Shell Surface Treatment

cadmium and chromate

Shell Type

solid

Specification/Standard Data

96906-ms3406 government standard

Terminal Location

back single mating end single contact grouping

Terminal Type

crimp single mating end single contact grouping

Test Data Document

"81349-mil-c-5015 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

16

Thread Series Designator

un

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

81343

Society of Automotive Engineers Inc

U.s./canadian manufacturers

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-317-3057?

   The FSCG of the NSN 5935-01-317-3057 is 5935

2. Does the NSN 5935-01-317-3057 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-317-3057 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-317-3057 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-317-3057 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-317-3057 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Tue, Mar 27, 1990