NSN MS3409DJ17E8E

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

internally threaded coupling ring connector locking method, cable clamp connector cable strain relief method, 0.350 inches minimum and 0.625 inches maximum cable entrance diameter, angle shape w/cable clamp body style, 135.0 body angle in deg.

NSN 5935-01-515-9102 Datasheet

(NSN) National Stock Number

5935-01-515-9102

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-515-9102

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Fri, Dec 12, 2003

Schedule B Code

8536695050

Body Angle In Deg

135.0

Body Style

angle shape w/cable clamp

Cable Entrance Diameter

0.350 inches minimum and 0.625 inches maximum

Connector Cable Strain Relief Method

cable clamp

Connector Locking Method

internally threaded coupling ring

Contact Removability

removable single mating end single contact grouping

Contact Position Arrangement Style

16s-8 single mating end

Distance From Centerline To Cable End

3.312 inches maximum

Distance From Centerline To Connector End

2.625 inches maximum

End Item Identification

virginia class submarine ssn-774

Environmental Protection

corrosion resistant and salt spray proof and shock resistant and vibration resistant and weather resistant

Included Contact Quantity

5 single mating end single contact grouping

Included Contact Type

round socket single mating end single contact grouping

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Size

1.000 inches

Overall Diameter

1.250 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Special Features

contacts per mil-c-39029/45-294

Specification/Standard Data

96906-ms3409 government standard

Terminal Location

back single mating end single contact grouping

Terminal Type

crimp single mating end single contact grouping

Test Data Document

"81349-mil-dtl-5015 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a and 2b

Thread Direction

right-hand

Thread Quantity Per Inch

20

Thread Series Designator

unef

Threaded Device Type

back shell and coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-515-9102?

   The FSCG of the NSN 5935-01-515-9102 is 5935

2. Does the NSN 5935-01-515-9102 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-515-9102 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-515-9102 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-515-9102 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-515-9102 was assigned to the Federal Catalog?

   It was assigned 22 years ago, on Fri, Dec 12, 2003