NSN MS3412D20-27B

An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes:bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.

1.140 inches minimum and 1.172 inches maximum center to center distance between mounting facilities parallel to height, 1.140 inches minimum and 1.172 inches maximum distance between centerlines of mounting facilities parallel to body width, unable to decode contact position arrangement style, externally threaded shell connector locking method, straight shape, external coupling body style.

NSN 5935-01-101-7833 Datasheet

(NSN) National Stock Number

5935-01-101-7833

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-101-7833

Requires Demilitarization

Yes

(INC) Item Name Code

61925

Date

Mon, Oct 6, 1980

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

1.140 inches minimum and 1.172 inches maximum

Connector Locking Method

externally threaded shell

Contact Position Arrangement Style

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.140 inches minimum and 1.172 inches maximum

Distance From Mounting Shoulder To Front Face

0.750 inches minimum and 0.781 inches maximum

Environmental Protection

moisture proof and salt water resistant and vibration proof and shock resistant and cold resistant and heat resistant and explosion proof

Insert Material

unable to decode

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Length

0.290 inches and 0.625 inches

Nominal Thread Size

1.188 inches and 1.250 inches

Operating Temp Rating

-55.0 celsius minimum and 200.0 celsius maximum

Overall Height

1.469 inches minimum and 1.531 inches maximum

Overall Length

1.662 inches maximum

Overall Width

1.469 inches minimum and 1.531 inches maximum

Polarization Method

keyway or multiple keyway

Shell Surface Treatment Document And Classification

qq-p-416,type 2,class 3 fed spec 1st treatment response and qq-p-416,type 2,class 3 fed spec 2nd treatment response

Shell Material

aluminum

Shell Surface Treatment

cadmium and chromate and nickel

Shell Type

solid

Specification/Standard Data

96906-ms3412 government standard

Test Data Document

"81349-mil-c-5015 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

unef

Threaded Device Type

back shell and coupling facility

Unthreaded Mounting Hole Diameter

0.115 inches minimum and 0.130 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0061925

Cross Reference

CAGE Codes

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-101-7833?

   The FSCG of the NSN 5935-01-101-7833 is 5935

2. Does the NSN 5935-01-101-7833 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-101-7833 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-101-7833 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-101-7833 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-101-7833 was assigned to the Federal Catalog?

   It was assigned 46 years ago, on Mon, Oct 6, 1980