NSN MS3418-16C

0.932 inches minimum and 1.056 inches maximum distance from centerline to cable end, 1 cable opening quantity, 0.625 inches nominal cable opening diameter, 1.585 inches maximum distance from centerline to connector end, 90.0 body angle in deg.

NSN 5935-01-025-4177 Datasheet

(NSN) National Stock Number

5935-01-025-4177

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-025-4177

Requires Demilitarization

Yes

(INC) Item Name Code

23010

Date

Sun, Aug 1, 1976

Schedule B Code

8548900100

Body Angle In Deg

90.0

Cable Opening Diameter

0.625 inches nominal

Cable Opening Quantity

1

Distance From Centerline To Cable End

0.932 inches minimum and 1.056 inches maximum

Distance From Centerline To Connector End

1.585 inches maximum

Material

aluminum alloy location not otherwise specified

Mounting Facility Type And Quantity

1 threaded coupling

Nominal Thread Size

1.000 inches

Overall Width

1.067 inches minimum and 1.112 inches maximum

Size Designation

16

Specification/Standard Data

96906-ms3418 government standard

Style Designator

clamp, angle tie strap type

Surface Treatment

cadmium

Test Data Document

"81349-mil-c-5015 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2b

Thread Direction

right-hand

Thread Series Designator

unef

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0023010

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-01-025-4177?

   The FSCG of the NSN 5935-01-025-4177 is 5935

2. Does the NSN 5935-01-025-4177 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-025-4177 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-025-4177 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-01-025-4177 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-025-4177 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Sun, Aug 1, 1976