NSN MS3454W22-7P

A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see spacer, plate. Excludes:items with lubricating features, see bearing, sleeve and bushing, sleeve. See also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).

externally threaded shell connector locking method, unable to decode contact position arrangement style, round bushing accommodation hole shape, unable to decode contact material, straight shape, external coupling body style.

NSN 5935-01-261-8596 Datasheet

(NSN) National Stock Number

5935-01-261-8596

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-261-8596

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Wed, Aug 19, 1987

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Bushing Accommodation Hole Shape

round

Connector Locking Method

externally threaded shell

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Ac Voltage Rating In Volts

unable to decode

Contact Maximum Current Rating In Amps

unable to decode

Contact Maximum Dc Voltage Rating In Volts

unable to decode

Contact Surface Treatment Document And Classification

Contact Surface Treatment

Distance From Mounting Shoulder To Front Face

0.970 inches nominal

Environmental Protection

moisture proof and salt water resistant and vibration proof and shock resistant and cold resistant and heat resistant and explosion proof

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material

unable to decode

Insert Position In Deg

0.0

Mating End Quantity

1

Mounting Facility Thickness

0.128 inches maximum

Nominal Thread Size

1.312 inches and 1.375 inches

Overall Diameter

2.241 inches nominal

Overall Length

2.500 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surface gold

Precious Material

gold

Precious Material And Weight

0.005 gold grains, troy

Shell Surface Treatment Document And Classification

qq-p-416,ty 2,cl 3 fed spec all treatment responses

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium and chromate

Shell Type

solid

Special Features

in order to complete the connector assembly,the user must obtain/provide the backshell; standard versions may be ordered as nsn 5935-01-172-8574,p/n m85049/52-1-22w for the straight style,or nsn 5935-01-190-6817,p/n m85049/51-1-22w for the right angle style

Specification/Standard Data

96906-ms3454 government standard

Terminal Location

unable to decode

Terminal Type

unable to decode

Test Data Document

"81349-mil-c-5015 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

unef

Threaded Device Type

back shell and coupling facility and mounting bushing

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-261-8596?

   The FSCG of the NSN 5935-01-261-8596 is 5935

2. Does the NSN 5935-01-261-8596 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-261-8596 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-261-8596 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-261-8596 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-261-8596 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Wed, Aug 19, 1987