NATO Stock Number
5905-00-945-9527
Sold in multiples of
1 EA
DEMIL
NO
Section Quantity
1
Body Style
Cylindrical friction mounted
Reliability Indicator
Not established
Overall Length
2.875 inches
Body Diameter
1.875 inches
Shaft Diameter
Between 0.2494 inches and 0.250 inches
Shaft Length
Between 0.594 inches and 0.656 inches
Body Length
2.250 inches
Overall Diameter
2.375 inches
Shaft Style
Round
Actuator Type
Single shaft
Effective Electrical Rotation In Deg Angular Rotation
3600.0
Maximum Starting Torque
1.20 inch-ounces
Maximum Stop Torque
1000.00 inch-ounces
Shaft End Play
0.005 inches
Shaft Runout
0.002 inches
Pilot Diameter Runout
0.002 inches
Shaft Radial Play
0.002 inches
Terminal Location
Radially positioned over less than half the circumference
Mounting Method
Clamp ring
Features Provided
Nonmetallic shaft
Electrical Resistance Per Section
50.0 kilohms single section
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation
1805.0 single section
Rotary Actuator Travel In Angular Deg
3610.0
Function Conformity Tolerance Per Section
-0.09/+0.09 single section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-30.0/+30.0 single section
Power Dissipation Rating Per Section In Watts
5.0 free air single section
Function Conformity Per Section
Single section independent linearity
Fixed Tap Quantity Per Section
1 single section
Tap Location Tolerance Per Section
-10.0/+10.0 degrees angular rotation single section
Resistance Tolerance Per Section In Percent
-3.0/+3.0 single section
Actuator Travel Control Feature
Clutch
Function Characteristic Per Section
Single section graph
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
40.0 single section
Test Data Document
92220-r080-601-2043 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
4 tab, solder lug