NSN P04391

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

0.500 inches minimum and 0.502 inches maximum grip length, mq-9 end item identification, 0.250 inches nominal grip diameter, 0.750 inches minimum and 0.752 inches maximum fastener length, unable to decode hardness rating.

NSN 5305-01-580-0802 Datasheet

(NSN) National Stock Number

5305-01-580-0802

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5305 - Screws

(NIIN) National Item Identification Number

01-580-0802

Requires Demilitarization

Yes

(INC) Item Name Code

29294

Date

Thu, Dec 3, 2009

Schedule B Code

7318152000

End Item Identification

mq-9

Fastener Length

0.750 inches minimum and 0.752 inches maximum

Grip Diameter

0.250 inches nominal

Grip Length

0.500 inches minimum and 0.502 inches maximum

Hardness Rating

unable to decode

Head Diameter

0.375 inches nominal

Head Height

0.188 inches nominal

Head Style

flat chamfer

Internal Drive Style

four spanner

Material

Part Name Assigned By Controlling Agency

tight-tolerance shoulder screw

Minimum Tensile Strength

70000 pounds per square inch

Nominal Thread Diameter

0.190 inches

Thread Class

2a

Thread Direction

right-hand

Thread Length

0.250 inches nominal

Thread Quantity Per Inch

32

Thread Series Designator

unified national joint fine (unjf)

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

F83 - General atomics asi for depot storage only 16761 via del campo ct san diego, ca 92127-1713

Pseudo Item Name Code

0029294

Cross Reference

CAGE Codes

39428

Mcmaster-Carr Supply Co

Non-manufacturers

0YJB5

General Atomics Aeronautical Systems, Inc.

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

7318-15-2000

Description

bolts and bolts and their nuts or washers exported in the same shipment

End Use

12110 - Iron and steel products, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69421

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5305-01-580-0802?

   The FSCG of the NSN 5305-01-580-0802 is 5305

2. Does the NSN 5305-01-580-0802 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318152000

3. Does NSN 5305-01-580-0802 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5305-01-580-0802 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5305-01-580-0802 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5305-01-580-0802 was assigned to the Federal Catalog?

   It was assigned 16 years ago, on Thu, Dec 3, 2009